gsm controller although the weight of the receiver
November 30th, 2009 Filed Under gprs
The entire power system is designed to be compatible with a voltage of 5V. The plug is covered by a rubber sleeve. The layout of the BT-338 is quite ordinary, and gsm controller control area (power led) is opposite to the antenna inside. This is covered with a plastic different from that of the body of the receiver, not to affect the level of reception. The notification system consists of three LEDs: one for Bluetooth, one for power and one for the GPS signal. The slow blinking LED indicates no Bluetooth connection away, the faster the gsm controller. The LED lights on feed only in the presence of residual charge limited and during charging. The LED on the GPS signal, when lit, indicates no signal, with the flashing in the presence of the fix. To access the battery you must remove the appropriate door. This has two lines in non-slip rubber solution that might prove unsatisfactory for positioning on the gsm controller, although the weight of the receiver. Once you remove the battery, you realize immediately the size of it.
Post Linx
Permalink | Trackback |
|
Print This Article |
Comments
Leave a Reply